|Classified catalogue of the manufacturers and suppliers of analytical equipment (spectroscopy instruments, chromatography instruments, gas analysis, elemental analysis, thermal analysis instruments, food analysis instruments, pharmaceutical analysis, water analysis instruments, process analytical instruments, materials testing equipment, petroleum testing instruments), laboratory equipment (sample preparation equipment).||Систематический каталог производителей и поставщиков аналитического оборудования (приборы для спектроскопии, хроматографии, анализа газов, элементного анализа, термоанализа, анализа пищевых продуктов, лекарственных средств, анализа воды, поточного химического анализа, испытания материалов, контроля нефтепродуктов), лабораторного оборудования (пробоподготовка).|
|Current edition (since March 13, 1998)- Текущая редакция (с 13 марта 1998).|
|Alphabetical catalogue of companies:||Алфавитный каталог компаний:|
|A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | Russian companies.|
|I - index of alphabetical catalogue in English language.||I - индекс алфавитного каталога на русском языке.|
|Illinois Instruments, Inc.|
|Illinois Instruments, Inc is a manufacturer
and supplier of process gas analysis instrumentation (process oxygen analyzers,
moisture in gas analyzers, carbon dioxide analyzer), headspace analysers
and permeation analyzers.
Illinois Instruments, Inc manufactures process oxygen analyzers for measuring gases for trace oxygen or percent oxygen. The product line uses three different technologies for measurement including electrochemical fuel cell, zirconia, and Hersch cell. These technologies allow us to measure virtually any gas stream with oxygen levels from ppb up to 100%. Illinois Instruments also manufactures moisture analyzers for trace moisture levels in inert gas streams and the carbon dioxide analyzer uses a unique infrared sensor for percent measurement of carbon dioxide in most industrial gases.
Illinois Instruments' Model 1000 Trace Moisture Analyzer provides accurate and reliable measurements of moisture in gases from 0 to 1000 ppm. It may be used on most industrial gases and atmospheres, and may be either bench top or panel mounted. The Model 1000 utilizes an electrolytic sensor which provides an absolute measure of moisture without calibration. The sensor is contained within the analyzer but is easily removable to mount remotely in the process plant or an environmental chamber. The Model 1000 is ruggedly constructed and may be used on the process line for continuous monitoring.
Illinois Instruments, Inc is a manufacturer of headspace analyzers for measurement of oxygen, carbon dioxide, or both. The line of headspace analyzers provide rapid determination of oxygen or carbon dioxide in the headspace of food packages.
Illinois Instruments also manufactures oxygen permeation analyzers for all industries where oxygen transmission rates of packaging films and packages are critical. Permeation analyzers measured of oxygen transmission rates (OTR) through permeable films and multi-material laminated packaging for perishable consumables such as food, beverages, pharmaceuticals, electronics.
|Ilmvac GmbH (formerly SASKIA Hochvakuum und Labortechnik GmbH).|
|ILMVAC GmbH is a manufacturer of vacuum products: vacuum pumps, vacuum measurement and control equipment, vacuum components, vacuum valves, vacuum flange, vacuum distribution system, accessories for vacuum equipment. First of all, LMVAC GmbH is a manufacturer of vacuum pumps. ILMVAC GmbH manufactures scroll pump, diaphragm pumps, diaphragm pump systems, rotary vane pumps and rotary vane pump systems, turbomolecular pumps, oil diffusion pumps and oil diffusion pump systems, Roots pumps and Roots pump systems, aspiration-systems. LMVAC GmbH also is a manufacturer of vacuum measurement and control instrumentation - vacuum gauges and controllers of vacuum. ILMVAC GmbH manufactures rough vacuum gauges, fine vacuum gauges, high vacuum gauges and multi vacuum gauges for measuring vacuum from rough vacuum to high vacuum range.|
|ILS Innovative Laborsysteme GmbH.|
|ILS Innovative Laborsysteme GmbH is a manufacturer of liquid handling lab equipment: microsyringes for gas chromatography and liquid chromatography, dispensers and dilutors. Manufactures syringes for autosamplers and headspace samplers, syringes for HPLC valve injectors (Altex, Hewlett Packard, Knauer, Rheodyne, Shimadzu, Valco, Varian and Waters). Also offer maintenance and repair service for microsyringes of all brands. More than 1,000 types and variations of microsyringes from 1 µl to 50 ml for precision sampling and dosage in chromatography, spectroscopy, preparation of standard solutions, for manual application, and for use in autosamplers, diluters, dispensers and other liquid handling instruments are manufactured. Precision diluter valves have recently been added to the production range. ILS shrinks its own precision bore tubing from DURAN, a highly resistant borosilicate glass. All metal parts and PTFE-seals are made in-house. State of the art equipment such as milling machines, lathes and glass shrinking equipment, all computer controlled, combined with years of glass working experience, guarantee optimum quality of the products.|
|Imetra, Inc is a manufacturer and
supplier of precision components for the instrument industry, made from
ceramics, carbide, sapphire synthetic, sapphire industrial, ruby synthetic,
ruby industrial and diamond. Imetra, Inc manufactures check valves includes:
ball check valves, needle valves, electro-magnetic valves, miniature, standard
or custom-made. Imetra, Inc is a manufacturer of ball check valve cartridges,
metal, ceramic or synthetic sapphire and ruby. Electro-magnetic miniature
valves up to 1000 Hertz. Application engineering available. Also offer
to design and build any valve per your specifications.
Imetra, Inc is a manufacturer and supplier of consumable products for the thermal analysis: caps and capsules, boats, weighing pans, pans and covers, reduced copper and copper oxide. Imetra Inc manufactures pressed capsules, boats, weighing pans and pans & covers as well as cups formed from foil for thermal analysis. A wide range of standard sizes available, or custom-made. Materials: tin, aluminum, nickel, silver, platinum, gold or ceramics. Pre-cleaned on request. Imetra, Inc is a manufacturer of reduced copper, made from high purity electrolytic copper wire diameter 0.5 or 0.7 mm. Regular or ultra-clean. Imetra Inc manufactures copper oxide, made from high purity electrolytic copper wire, oxidized as porous structure to assure maximum oxidation efficiency.
|INEL (France) is a manufacturer of X-ray diffraction instrumentation (X-ray diffractometers and goniometers, X-ray optic, X-ray generators and detectors). A systems range from routine powder diffractometers for powder studies to complex goniometers for texture or thin films measurements. INEL provides a fast tool for detecting X-rays based upon the unique position sensitive detector designs. A vast variety of sample holders and thermal stages adapt to the goniometer, offering enhanced capabilities performance for many experiments, including thin films, dynamic and in-situ studies. INEL also proposes a set of other devices to increase the confort of users. Inel offers many types of customized diffractometers and accessories upon request, including curved detectors, linear detectors and software. The electronic interface for various peripherals, the X-ray generator and many types of X-ray tube or monochromators are available. INEL is a supplier of high temperature furnace, capillary furnace, cryostat and cryofurnace for thermal experiments.|
|INFICON Inc. (formerly Leybold Inficon Inc) is a manufacturer
of field portable analytical instruments for on-site environmental monitoring
and process instrumentation for analysis, monitoring and control. INFICON
Inc manufactures specialized instruments such as in-situ gas analyzers
and sensors for semiconductor, thin films and other manufacturing processes;
helium and halogen leak detectors for vacuum and AC & refrigeration
applications; vacuum gauges for total pressure measurement; and field-portable
gas chromatograph - mass spectrometer for environmental testing. INFICON
Inc manufactures a variety of field portable and process gas analyzers
(gas analysis instruments) includes: Quadrupole mass spectrometers (RGA)
for monitoring and controlling residual gases in vacuum environments used
for semiconductor manufacturing and other processes, high-end quadrupole
mass spectrometers for research, and plasma process monitors for plasma
diagnostics. The Transpector Gas Analysis System provides superior levels
of performance for process control, including multiplexing, PPM analysis
and even reliable in situ CVD process monitoring. Featured products:
The HAPSITE - Field portable gas chromatograph - mass spectrometer (GC-MS) for on-site environmental characterization and monitoring, air pollution analysis, easy and dependable on-site analysis of volatile organic compounds (VOC). Battery-powered, lightweight, and weatherproof, HAPSITE can speciate and quantify VOC in minutes, significantly reducing the cost, time, and difficulties of environmental testing.
|Infometrix Inc is a developer of software products in the field of chemometrics, employing pattern recognition and modeling techniques for the analysis of multivariate data sets in chemistry and biotechnology. Products: The Pirouette, Ein*Sight and InStep chemometrics software for pattern recognition, data exploration, regression calibration and classification.|
|Infrared Analysis, Inc.|
|Infrared Analysis, Inc specializes in the measurement of gases. Infrared Analysis, Inc is a manufacturer of long pass gas cells, quantitative database, infrared gas analysis software, and automated measurement system allows real time monitoring of hundreds of gases simultaneously down to ppb levels. Infrared Analysis, Inc manufatures long path cells for gas measurement, with optical paths from 1 meter to 1 kilometer. Supplies database of infrared gas phase reference spectra for quantitative analysis and QASOFT automated and user-interactive computer programs for measuring and reporting gas concentrations. Adjustable-focus retro-reflector and multiple-pass optics for open path gas measurement. Infrared Analysis, Inc is a supplier of complete analytical systems for FT-IR multi-component gas analysis that work both in extractive mode and open path mode. Infrared Analysis will supply a ready-to-use gas handling system with one of its absorption cells.|
|InfraRed Associates, Inc.|
|InfraRed Associates, Inc is a manufacturer of HgCdTe and InSb detectors and multi-element detector arrays from 2 to 64 elements for the analytical, medical, enviromental and industrial markets. These HgCdTe and InSb detectors are offered in a variety of cooling options, including: liquid nitrogen closed cycle and thermoelectric coolers. A variety of standard products and custom devices are available, covering the wavelength range from 1 to 25 microns.|
|Infrared Focal Systems, Inc.|
|Infrared Focal Systems, Inc. is a
manufacturer and supplier of infrared transmitting fiber optics, bulk glasses
and spectrometers for sensor and laser power delivery applications, handheld
infrared spectrometer based on the acousto-optic tunable filter (AOTF)
and software or plastics identification.
Infrared Focal Systems has developed a handheld infrared spectrometer based on the acousto-optic tunable filter (AOTF). This line of products includes the “PlastiScan” handheld plastics identifier for plastics recyclers and a portable infrared spectrometer for scientific and industrial applications. The PlastiScan SH software for plastics identification is installed for PlastiScan SH. The following types of plastics can be included in a typical data base: ABS, PP, PS, PC, PVC, PBT, PA, PET, PC/ABS, AS, POM, PMMA, PUR, PE, PVD, PPO and PVC/ABS. Other types are possible by custom order.
Infrared Focal Systems is a manufacturer of AOTF (Acousto-Optic-Tunable-Filter) Spectrometer - This spectrometer boasts exceptional speed and stability while maintaining low noise. It has applications in both industry and laboratory. Handheld infrared spectrometer based on the AOTF. Features include high speed, no moving parts, and battery operation. This handheld instrument is very fast and convenient to use. The instrument operates by scanning the near-infrared spectrum of the sample, using an acousto-optic tunable filter (AOTF).
The AOTF is a birefringence crystal capable of rapid and precise wavelength selection. It may be used as the heart of a spectrometer or monochromator for applications in the UV through mid-IR. Advantages over a filter wheel or grating monochromator include high resolution, high speed, random or sequential wavelengths access, no moving parts, compact size, and imaging capabilities.
Infrared Fiber Systems, Inc produces the Germanium Oxide glass fiber (HP fiber) for use with the Er:YAG and Er:YSGG lasers. These lasers coupled with HP fiber delivery systems can be used for painless dentistry and precise ablation without thermal damage in laser surgery procedures. Infrared Fiber Systems, Inc also manufactures fluoride glass fibers (SG fiber) for use in a variety of industrial and scientific sensor systems such as temperature sensing and remote chemical analysis. These fibers transmit from the ultraviolet through 5 microns in the mid-infrared.
|Infrared Systems Development Corp.|
|Infrared Systems Development Corp is a manufacturer of blackbody sources, precision infrared radiometer systems, detector preamplifiers, IR test systems, IR system accessories. Infrared Systems Development Corporation manufactures IR field research spectro-radiometer systems, cavity and extended area IR black-body reference sources from -20C to 1200C, low noise MCT, INSB, PBS, PBSE and PYRO detector preamplifiers and energy modulators. Infrared Systems Development Corp also offers custom IR system designs.|
|Inmark is a wholesale manufacturer of plastic containers including plastic bottles, jars, drums, cans, sprayers, caps, hazarous and dangerous goods packaging and pails. Inmark, Inc specialized in hazardous material shipping and packaging supplies. Inmark manufactures containers and labware for hazardous chemicals, biomedical and general products. Products: Plastic containers, labware, plastic bottles, glass bottles, wholesale containers, drums, pails, cans, boxes, caps, silk-screening, trigger sprayers, finger-tip sprayers, hazmat, absorbents, vials, jars, storage containers, overpacks, safety coated glass, pumps, labels. Certified: UN, DOT, IATA, ICAO, OSHA, UPS, FED-X, CFR-49.|
|Innov-X Systems, Inc.|
|Innov-X Systems is a manufacturer of portable XRF spectrometers, handheld XRF metal analyzers, portable XRD instruments, at-line, in-line XRF analyzers. Innov-X Systems manufactures field portable X-Ray fluorescence spectrometers: handheld XRF metal analyzers, alloy sorters, mobile XRF spectrometer (compact, rugged, battery powered X-Ray fluorescence spectrometer). Innov-X Systems manufactures field portable X-Ray difractometer for on-site rock and mineral analysis (battery powered, rugged XRF / XRD instrument). Innov-X Systems manufactures portable XRF analyzer system for predictive engine failure detection by instant metals determination in fuels and lubes. Innov-X Systems also manufactures at-line, in-line XRF analyzer (on-line process XRF spectrometer system) and in-line scrap sorter (a fully automated XRF-based system that instantly identifies and sorts material by its chemical composition).|
|Inorganic Ventures Inc.|
|Inorganic Ventures Inc is a manufactirer of Certified Reference Materials (CRM). Inorganic Ventures Inc manufactures inorganic and organic standards, internal standards and surrogates for instrument calibration, R&D, proficiency evaluations, and quality control, includes custom-grade high purity standards for ICP, ICP-MS, DCP, flame AA and GFAA, chromatography standards for IC, GC, GC-MS, environmental calibration standards for EPA methodologies.|
|INP Greifswald (Institute of Low Temperature Plasma Physics e.V.)|
|INP Greifswald (Institut fur Niedertemperatur- Plasmaphysik e. V. Greifswald, Germany)- Institute of Low Temperature Plasma Physics e.V. offers a complete service package from problem definition to prototype. INP Greifswald offers solutions using plasma technology for developing a new materials, functional surfaces, biomedicine equipment, environmental technology, plasma and light sources, diagnostics and modelling. INP Greifswald developed the Q-MACS, a compact and user-friendly Quantum cascade laser- measurement and control system, has been developed for various applications, like the analysis of plasma processes or the high sensitive trace gas analysis. It combines the benefits of absorption spectroscopic methods in the mid infrared with the favorable properties of quantum cascade lasers and is therefore, in combination with thermoelectrically cooled infrared detectors, well suited for industrial applications, in particular for real-time process control. Manufacturer of quantum cascade laser measurement and control system - neoplas control GmbH.|
|InPhotonics is a manufacturer of Raman fiber optic sampling
probes and accessories, and fiber optic Raman spectrometers for industrial,
laboratory and field chemical analysis. InPhotonics has developed numerous
specialized Raman systems to meet specific customer requirements for analytical,
quality control, and process monitoring applications. InPhotonics is a
manufacturer of the InPhotote, a portable Raman system for field identification
of unknown chemicals. Several fiber optic probes for sampling under difficult
environmental conditions and constrained space have been successfully engineered
and installed. InPhotonics manufactures a complete line of fiber optic
probes based on the original RamanProbe optical design. The RamanProbe
II is a versatile solution where solids and liquids need to measured through
containers or by immersion. For reaction monitoring, a high pressure RamanProbe
enables in situ measurement at elevated pressures. InPhotonics manufactures
process probes to withstand demanding chemical and physical environments.
The RS2000 Raman spectrometer features high resolution and full spectral range capabilities in a system with no moving parts or throughput-limiting slits. Unique to the system is an echelle spectrograph that offers light dispersion in two dimensions to fully exploit the CCD detector area. The result is better than 1 cm-1 spectral resolution from 200- 3500 cm-1 (Raman shift). Combined with the RamanProbe for remote sampling, the RS2000 is the ideal Raman spectrometer for difficult environments where portability and insensitivity to vibration are required. The RS2000 is also perfect for applications requiring high resolving power and complete spectral range coverage.
The RamanProbe product line offers measurement capabilities for hand-held, immersion, and reaction monitoring applications. The patented optical design provides complete removal of silica background, high throughput, and experimental versatility.
The InPhotote is a complete, field portable chemical identification system. Incorporated into the carrying case are a laser, spectrograph, TE-cooled CCD detector, RamanProbe sampling probe, and notebook computer for the on-site identification of unknown chemical species. Although compact and portable, the InPhotote boasts 6 cm-1 spectral resolution over a 2000+ cm-1 range making it capable of discriminating mixtures and detecting contaminants. The portable device can be powered by a 12V outlet (e.g. car battery) or a separate portable power pack as well as conventional 110V-AC power. Designed for field identification of forensic chemicals, the InPhotote can be used in many applications where rapid analysis through packaging materials is required.
|InProcess Instruments GmbH (IPI).|
|InProcess Instruments GmbH (IPI)
is a manufacturer and supplier of process mass spectrometers for online
gas analysis (mass spectrometry gas analyzers) includes: the ESD 100 Element
specific detector coupled to an elemental analyser for the sensitive determination
of elements and stable isotopes, GAM 200 Multi-component Gas Analyser,
GAM 300 Process gas mass spectrometer for gas analysis from percentage
to ppm level, GAM 400 Mobile bench-top mass spectrometer for R&D application
(modular concept with open design), GAM 500 UT On-line mass spectrometer
for ultra trace analysis in pure gases and gas mixtures, GAM 600SI On-line
mass spectrometer with soft ionisation, LGA407 Lamp gas analyzer for the
analysis of lamp fillings, GIA 522, Gas inclusion analyser for the analysis
of micro gas inclusions, IMU 200 Uranium mass spectrometer for isotope
composition of uranium hexafluoride.
Featured product: The ESD 100 is a powerful addition to elemental analysis (EA) for coupling to elemental analysers from many manu-facturers. Depending of the EA configuration it is possible to analyse the concentration of C, H, N, O, S and Ar as well as their isotopic ratio. This measurement can be performed rapidly and easily in soil and plant samples over a wide dynamic range and without any interferences from memory effects. The ESD 100 system can be easily coupled to new and existing elemental analysers and optimised for the specific applications.
InProcess Instruments GmbH (IPI) manufactures quadrupole mass spectrometers with a variety of measuring parameters; gas inlets with pressure and temperature control as well as multi-port gas inlet systems for the addition of different gases; various coupling options; and analogue ports for data exchange in connection with InProcess QUADSTAR Software, which allows optimized equipment operation and the automization of the whole analytical process. The perfect combination of IPI mass spectrometers and InProcess QUADSTAR Software allows software support for all product groups, fully automated calibration and analysis, efficient data analysis, easy generation of reports, as well as modem support for remote diagnosis and maintenance. InProcess QUADSTAR also supplies application-specific modules. The main areas of application are online process gas analysis, quality control and special applications for the coupling with other analytical technologies such as elemental analysis and thermogravimetry. The functions include process control, quality control and environmental protection.
|Instec Inc is a manufacturer of scientific instrumentation, such as microscope thermal video systems, microscope thermal stages, hot chucks, temperature controllers, high voltage linear amplifiers, high voltage waveform generators, photodetectors, and custom scientific equipment. Instec Inc manufactures precision temperature controllers, microscope heating and cooling stages, and microscope thermal video systems for liquid crystal, polymer, food, pharmaceutical sciences, cell culture, X-ray, FTIR, and thermal microscopy research.|
|Instech Laboratories, Inc.|
|Instech Laboratories, Inc specialized in the design of medical devices and the development and manufacturing of scientific equipment for biomedical research. Instech Laboratories, Inc is a manufacturer of miniature low-flow peristaltic pumps, miniature high-efficiency shuttle pumps, low power pinch valves, syringe pumps, precision motor speed controllers, miniature stirrers for spectrophotometer cuvettes, dissolved oxygen monitors.|
|Instron Corporation is a manufacturer and supplier of material
test instruments (hardness testers, durometers, asphalt binder tester),
materials testing systems (tensile, compression, fatigue, hardness, spring
and impact testing equipment, environmental chambers), software, and accessories
used to evaluate the mechanical properties and performance of metals, plastics,
composites, textiles, ceramics, rubber, biomedical, and adhesives. Instron
materials testing systems and instruments test virtually all earth's natural
and man-made materials ranging from fragile fibers to the exotic materials
needed for space exploration. Instron Corporation manufactures materials
testing instrumentation for all types of material testing including tensile,
compression, fatigue, hardness, impact, and service life simulation. Instron
Corporation is a supplier of advanced computer-controlled systems for structural
and multi-axial service simulation for the transportation industries. Rockwell,
Brinell, and Tukon hardness testers in a wide range of models for production
and lab applications. Hardness, spring and impact testing equipment for
all types of quality control lab requirements. Durometers for determining
the indentation hardness of elastomers and plastics, produced by Shore
Instruments. Instron Corporation manufactures a complete range of
accessories for mechanical testing of materials and other material tests.
Instron also offers laboratory information management systems and extensive,
worldwide technical support and service including calibration, retrofit
systems and services and training.
Instron SFL (Severn Furnaces Ltd) is a manufacturer of high and low temperature thermal testing equipment in standard and custom configurations - environmental chambers, high temperature furnaces and drop tube furnaces. The family of environmental chambers designed for use in both static and dynamic testing of a wide range of materials and components including plastics, metals, elastomers, paper, textiles and composites. Instron SFL also manufactures specialized heating systems for science and research applications.
Instron Corporation is a manufacturer of asphalt testing instrumentation. The AsphaltProТ Direct Tension Tester - asphalt testing system for performing direct tension tests of asphalt binder at low pavement temperatures that meet the new specification: AASHTO TP3-98. This asphalt testing system pulls a sample of binder material at a constant strain rate in uniaxial tension until it breaks or fails. The AsphaltPro is a complete turnkey asphalt testing system even including cooling and computer. An aluminum test specimen that simulates the load and strain characteristics of the asphalt binder is included. This verification specimen has been tested on a direct tension machine whose load, strain, and temperature transducers are traceable to NIST standards.
Technical characteristics of asphalt testing system: A 500N load cell with a two column load frame, LVDT, and loading pins into a single, replaceable unit. A recirculating cooling unit delivers refrigerated fluid to the test bath at temperatures down to -36 degrees C. The bath allows for storage of up to 16 specimens at test temperature. The asphalt testing system includes Merlin system control and data acquisition software. The Merlin software also provides test methods which are designed specifically for asphalt binder testing.
|Instrument Specialists Inc.|
|Instrument Specialists, Inc. is a supplier of thermal analysis instrumentation, service parts and supplies, software for the thermal analysis systems. The company supplies a wide range of thermal analysis products including TA-PC software for thermal analysis and acquisition software for DSC, DTA, TGA, TMA and STA. Thermal Analysis Software is designed to automate data collection, control and analysis from many types of thermal analysis instruments including: Instrument Specialists, Perkin Elmer, TA Instruments (DuPont), Mettler, Netzsch, Rheometrics (Omnitherm and PL), Setaram and others. This software provides the means to use other manufacturers' thermal analysis modules (DSC, DTA, TGA, TMA and STA). Instrument Specialists, Inc. is a manufacturer of thermogravimetric analyzer which measures weight changes as a function of temperature, and differential scanning calorimeter. Upgrade systems for existing analyzers including temperature controllers and interfaces. Instrument Specialists, Inc. is a supplier of new and reconditioned DSC, TGA and TMA instrumentation. The company provides service, support and supplies for many makes and models of thermal analyzers.|
|Insulated Structures, Inc.|
|Insulated Structures, Inc is a design and build specialists of insulated structures and their engineered environments, cleanroom products and services, climate control enclosures. Insulated Structures, Inc is a manufacturer of specialized enclosures includes: environmental cold and warm rooms, test chambers and clean rooms, conditioned outdoor modular structures. Insulated Structures Inc manufactures and supplies quality insulated wall panels for refrigerated process and storage warehouses, walk-in & reach-in refrigerators and freezers. Insulated Structures, Inc is a supplier of blast chillers and freezers, pallet rack structural support systems, drive-in pallet rack from Symons-Bodtker Associates, Inc. Insulated Structures, Inc is a supplier of custom refrigeration systems and glycol heat reclaim systems from Omni Temp Refrigeration. Insulated Structures, Inc is a supplier of electric sliding doors, traffic doors, strip curtains from Econo Max Manufacturing.|
|Integra Biosciences is a manufacturer of lab equipment for biotechnology and molecular biology. Integra Biosciences manufactures: Lab equipment for sterilisation - autoclaves. Lab equipment for liquid handling - computer controlled pipettors. Lab equipment for moleсular biology - autoradiography, detection and expression, analysis and presentation, system analysis software. Lab equipment for in-vitro technologies- modern cell cultivation. Lab equipment for in-vitro cell culture system- spinner system for suspension cultures, roller system for use in incubators, CO2 incubators.|
|Interactive Corporation (Japan) is
an authorized distributor of JEOL Ltd, Oxford Instruments, Gatan, Rigaku,
Nikon Instech, ULVAC Inc, Yamazaki Mazak in Russia. Interactive Corporation
is a supplier to the russian analytical and scientific equipment market
of JEOL electron microscopes and microanalyzers, X-ray fluorescence spectrometers,
X-ray diffractometers, NMR spectrometers, atomic force microscopes, optical
microscopes and digital imaging systems.
The main areas of specialization are: Delivery of electron microscopes and microanalyzers. Delivery of the analytical and measuring equipment for science research and industrial laboratories. Scientific equipment service and maintenance. On-site personnel training. Technical support and advice.
|Inter Dyne Systems, Inc.|
|Inter Dyne Systems, Inc is a manufacturer of the stainless steel laboratory peg boards, laboratory glassware drying racks, narcotic security storage cabinets, stainless steel countertops and shelving, and pegboard systems for the research laboratory and health care industries. Inter Dyne Systems Inc produces MOD-RACK stainless steel laboratory pegboard drying rack, with polypropylene pegs in several sizes and a variety of accessory items. Inter Dyne Systems Inc is a manufacturer of the NAR-LOCK stainless steel security storage cabinets.|
|IN/US Systems is the radiochromatography instruments company, a manufacturer of instrumentation, accessories and software for radiochromatography (radio-HPLC and radio-GC). IN/US Systems manufactures radioactivity detectors (radioactivity flow monitors) includes: beta and soft gamma flow through detector for HPLC, gamma flow through detector for HPLC, tritium manifold and radioactivity detector for gas chromatography.|
|International Crystal Laboratories.|
|International Crystal Laboratories
is a manufacturer and supplier of spectroscopy optics, spectroscopy supplies
and accessories for sample preparation, such as briquetting laboratory
presses, grinding mills and mortars, pellet dies, solid sampling supplies
for IR and XRF spectroscopy, heated platens & film makers.
Solid sampling supplies and accessories- KBr SpectroGrade powder and random cuttings, paper inserts, magnetic pellet and film holders, disposable pellet mounting cards, agate mortars and pestles, grinding mills and diamond compression cell.
Manual lab presses, automatic pneumatic presses and compact hydraulic presses- E-Z Press 12, 20 30 and 40 ton manual hydraulic presses, AIR-EZ Press 20, 30 and 40 ton automated pneumatic presses, hydraulic column presses and automated hydraulic column presses. A user's guide to chosing a lab press.
Pellet Dies- KBr pellet dies and XRF briquetting dies, replacement anvils.
Heated Platens and Film Makers- heated platens with temperature controller, heated platens with thermostat, constant thickness film maker, film maker kits, roto-film polymer film maker, tensioner polymer film maker.
|Interscience is the French company, a manufacturer of sample preparation products for microbiology: 80 and 400cc BagMixer, and 8 models of BagFilter, and BagPage filterbags for sterile blending of solid food samples. Interscience manufactures a complete line of products for food microbiology and solid sample preparation including mixers, blenders of different sizes - BagMixer, Minimix, BagMixer Jumbo and CollMix lab blenders - as well as consumables: BagFilter, BagPage Plus, BagLight bags for lab-blenders, Clinet chlorhexidine disinfecting wipes and spray, Anabac autoclave deodorant, BioParfum odor neutralizers. Also the Scan 500 Automatic bacteria colony counter, Spiral Plater DS Plus for automatic bacterial enumeration, Gravimat dilutor.|
|Interspectrum OU (Estonia, Tartu) is the spectroscopy instrument
company, manufacturer of laboratory and transportable FTIR spectrometers.
Interspectrum OU manufactures: the Model 2060 - Non Water Sensitive FTIR
Instruments for High Humidity Environments, Model 200-X - High Resolution
Fourier Transform Infra Red Spectrophotometer, Model 300-X - FTIR Portable
Instrument, Model 301-X - FTIR Portable Instrument with open infrared beam.
All Interspec FTIR instruments offer high S:N ratios and can provide ratios
up to 20000:1. Resolution in the infrared is available 2 cm-1 and programmable
up to 16 cm-1 The overall wavelength range is 7000 to 380cm-1.
The Interspec - 2000 series of FTIR spectrometers represent a low cost Fourier transform infrared spectrometers and employ a number of unique features that ensure high performance from a compact instrument. The Interspec-2000 measures just 43 X 33 X 29 cm and is regarded as one of the the most compact and versatile of all commercially available infrared spectrophotometers. The optical geometry is the simplest employing a new and remarkably compact Michelson self compensating optical system that eliminates many of the optical alignment problems found in conventional linear and pendulum type optical interferometers. The Interspec-2000 design avoids the use of conventional corner cube optics and dynamic alignment. In practice this also means that the instrument can be used in the research laboratory, in any university or college environment and if required, can also be used outside laboratory or in remote locations.
|INTERTECH Corporation is an American
company to supply analytical equipment, environmental monitoring equipment,
and also specialized in engineering and complete turnkey projects. Majority
volume of supplied equipment is produced by companies belonging to Thermo
Electron Corporation (USA). Laboratory, subsidiary, technological equipment,
furniture, and everything required for complete projects realisation are
produced by key world-wide companies, which INTERTECH represents in Former
Soviet Union. More then 15 years equipment sold by INTERTECH has been successfully
used by enterprises in metallurgy, chemistry, ecology, atomic industry,
medicine, pharmacology, criminalistics, geology, scientific-research centers,
and others. During this period INTERTECH supplied and renders service more
then 500 units of large equipment.
INTERTECH is headquartered in Atkinson, New Hampshire, USA. This office provides technical and logistical support to INTERTECH's branch offices in Moscow, Ekaterinburg and Krasnoyarsk (Russian Federation); Kiev and Donetsk (Ukraine); Almaty (Kazakhstan); and Warsaw (Poland).
INTERTECH has created net of regional sales representatives in Irkutsk, Novosibirsk, Tashkent, St.-Peterburg, Kharkov.
Analytical equipment and systems supplied by INTERTECH are fully certified by the Russian Bureau of Standards (GOSSTANDARD).
INTERTECH conducts a wide range of educational and promotional activities including seminars, exhibitions and training courses for users of equipment sold by INTERTECH. Training courses are carried out as on site either manufactures facilities. According to customer's choice it's possible to hold a seminars for small group of experts in INTERTECH Moscow office. Start-up and 1 year warranty basically are included in cost of analytical equipment.
INTERTECH Corporation supplies basically instrumentation by Thermo Electron Corporation including follow companies:
Thermo Elemental - atomic-absorption ICP spectrometers series SOLAAR S and SOLAAR M; atomic-emission ICP spectrometers series IRIS Intrepid II; arc atomic-emission spectrometer ATOMCOMP 2000; quadrupole ICP mass-spectrometer Series X; HR mass-spectrometer VG9000.
Thermo Noran - laboratory energy-dispersion X-ray fluorescence spectrometer QuanX.
Thermo ONIX - mass-spectrometers for flow gas analysis Prima and Sentinel.
Thermo Nicolet - IR-Fourier and Raman spectrometers: series IR and Avatar, and also NEXUS working in any spectrum range from UV till far IR; UV/Visible spectrophotometers series Nicolet Evolution; IR microscopes Continumm and Centaurms.
Thermo Spectronic - UV/Visible spectrophotometers series Helios.
Thermo Orion - equipment for electrochemical analysis.
Thermo Environmental Instruments - instruments (gas analyzers, control systems, mobile laboratory) for ecology monitoring of air and gas superpoison.
Thermo VG Scientific - Electron probe instruments for surface analysis: MICROLAB 350 - scanning HR Auger-spectrometer; Sigma Probe - X-ray photo-electron spectrometer (XPS); ESCALAB 250 - multi-functional XPS-microprobe.
Besides, INTERTECH Corporation supplies instrumentation produced by following companies:
NU Instruments - HR mass-spectrometers.
UNISEARCH Associates INC - LasIR spectrometer with tunable diode laser (TDL).
TA Instruments - equipment for thermoanalysis: DSC (Q10, Q100, Q1000), TGA (Q50 and Q550), jointed TGA/DSC/DTA analyzer (SDT Q600), thermo-mechanical analyzers (Q400, Q400EM), dynamic mechanical analyzers (Q800 and RSA III), dielectric analyzer (DEA 2970); devices for measurement of stress deformation and shift in materials under force: rheometers series AR and ARES, quality control rheometer (QCR II) and asphalt rheometer (CSA II).
Fritsch - sample preparation equipment: sample grinding (series Pulverisette), particle measurement devices (Analysette), dividing devices (Laborette).
|Intrinsic Bioprobes, Inc.|
|Intrinsic Bioprobes Inc is a manufacturer of Bioreactive Mass Spectrometer Probes (BRP) for MALDI-TOF analysis and other products for Biomolecular Interaction Analysis Mass Spectrometry (BIA/MS). Intrinsic Bioprobes Inc is a privately held Biotechnology Company focused on developing innovative technologies for rapid and sensitive proteome analysis. The company's proprietary technologies consist of Bioreactive Mass Spectrometer Probes (BRP), simple devices for rapid, sensitive and accurate protein characterization, and Mass Spectrometric Immunoassay (MSIA), a high-performance approach for the selective isolation of proteins from complex biological matrices. These root technologies are incorporated into the MASSAY Integrated System, a high throughput mass spectrometry approach geared for proteome characterization. The Company's intellectual property consists of four issued U.S. patents, ten pending U.S. patent applications and a number of corresponding international patent applications. Intrinsic Bioprobes Inc performs services related to applications involving the use of company's proprietary technologies. The services include high throughput screening (HTS) and protein characterization.|
|IOM GmbH (Innovative Optische Messtechnik GmbH).|
|IOM is a manufacturer of portable fluorescence measuring
devices for biotechnology and medicine (time-resolved fluorescence spectrometers
with fibre-optic probe). IOM GmbH (Innovative optische Messtechnik GmbH)
manufactures portable fibre-optic fluorescence spectrometer, portable measuring
system for fluorescence lifetimes and measuring system for laser-induced
fluorescence in biotechnological and medical diagnostics. The combination
of fibre-optic light transmission with both a high spectral and temporal
resolution lead to a line of broadly applicable measuring systems. Featured
The Laser Fluoroscope LF 401 Lambda is a fluorescence spectrometer that has been developed for the investigation of biological samples (cells and tissues) in particular. Due to its fibre-optic probe it suits well for any other measuring configuration, where fluorescence processes have to be examined with time resolution and high sensitivity. Other than with common fluorescence spectrometers, the LF 401 Lambda offers the unique chance to measure fluorescence processes time-resolved. Not only the spectral properties, but also the lifetime of these phenomena can be investigated. Thus one can differentiate between fluorescence radiation originating from different biomolecules with overlapping spectra. The Laser Fluoroscope LF 401 Lambda combines recent laser and fibre-optic technology with highly sensitive electronics. All components such as the laser system, the fluorescence detection and data pre-processing are contained in a single portable and robust housing. Typical examples of application are the investigation of endogenous fluorescence phenomena in cells and tissues (fluorescence of NADH, flavines, GFP/BFP) or the examination of marker fluorescence such as FITC and RITC in medical and pharmaceutical basic research. Due to sterilisable probes, the measuring system can be used under operating conditions in medicine and cell culture in favourable combination with minimally invading techniques.
|Ionwerks, Inc (Houston, TX, USA) is a mass-spectrometry
instrument company, manufacturer of time-of-flight (TOF) surface analysis
instrumentation, gas analysis and plasma analysis instrumentation, MALDI
TOF mass-spectrometer system and electronics for TOF mass spectrometers.
Ionwerks manufactures a complete line of instrumentation and electronic
equipment for use in time-of-flight mass spectrometry includes: the CompactTOF
mass spectrometer for gas analysis and plasma analysis, mass spectrometer
for surface analysis combined the mass spectrometry of recoiled ions (MSRI),
direct recoil spectrometry (DRS) and secondary ion mass spectrometry (SIMS)
in one compact analytical instrument, neutral atom beam source (NABS),
position sensitive detector (PSD), 4-anode detector and one anode detectors,
beam buncher, Poschenrieder TOF/Electrostatic energy analyzer, time-to-digital
converter (TDC) and software to use it, TOF timing controller, high voltage
pulser, power supply for beam steering, capacitive decoupler for detectors
and detector power supply.
The CompactTOF is the orthogonal extraction reflector time-of-flight mass spectrometer (ORTOF) for gas and plasma analysis, features compact and inexpensive design. Ionwerks Inc manufactures PlasmaTOF for plasma and gas analysis, GasTOF RGA with EI source, Mobility-TOF with MALDI source. Ionwerks Inc also offers the electronics to run this instrument - voltage supplies, a high voltage pulser, PC card timing controller, and time-to-digital converter (TDC) for data acquisition. Other products include a complete alkali ion beam line based on surface ionization sources, and a new 4-channel time-to-digital converter which makes it possible to use DRS and MSRI to monitor surface structure and composition during thin film growth. The instruments provide the in-situ structural and elemental analysis necessary for the growth of superior wide-bandgap materials, including diamond, gallium nitride, and silicon carbide.
|I.Q. Scientific Instruments, Inc.|
|I.Q. Scientific Instruments is a manufacturer of pH measurement instruments based on non-glass pH meter technology. I.Q. Scientific Instruments manufactures non-glass pH systems with stainless steel pH electrodes, and a full line of pH meters which accept both glass and non-glass probes. Non-glass probes store dry, require no maintenance and are easy to clean. Measure liquids, semi-solids, and viscous samples.|
|Ismatec SA, Labortechnik - Analytik.|
|Ismatec SA, Labortechnik - Analytik
manufactures ceramic piston pumps for corrosive media (0.008 – 310 ml/min),
gear pumps for pulseless fluid delivery and tubing pumps for a wide range
of scientific applications. Also Ismatec manufactures tubings and accessories
for Ismatec pumps. The Ismatec hand dispenser can be used with 1 to 8 dispensing
channels, depending on the pump-head model. Pressure control unit for controls
the rotation speed according to the pre-set differential pressure. Istmatec
software allows simultaneously operate (control, measure and evaluate)
different laboratory instruments within a specific application system.
ASA-AROMA - Automated Quality Control of Flavors, Fragrances, Aromatic and Food Additives, Perfumes and Cosmetics. Automated determination of up to 100 different samples with refractometer, polarimeter, density meter and spectrometer. The AROMA system from ISMATEC includes: all the sample preparation modules, all PC interfaces, the LabTech software, the adaptation of all measuring instruments, installation of the complete system, plus comprehensive user training. Almost all measuring instruments available on the market can be adapted for use with the AROMA system.
|Isolation Technologies, Inc.|
|Isolation Technologies Inc manufactures a complete line HPLC connection and protection devices. Isolation Technologies Inc is a manufacturer of the EZ-Tite wrench-free fittings, EZ-Solv in-line and precolumn filters, capillary tubing in peek and stainles steel, column couplers and frits. Isolation Technologies also manufactures HPLC column hardware and accessories for packing applications.|
|ISS Inc (USA) is a manufacturer of advanced steady-state
and time-resolved fluorescence instrumentation for research, clinical and
industrial applications. ISS Inc manufactures the PC1 photon counting spectrofluorometer
for high-sensitivity fluorescence, the KADStar diode array detector, the
K2 family of multifrequency cross-correlation phase and modulation fluorometers
for time-resolved fluorescence, and spectroscopic accessories. Accessories
for steady-state and time-resolved fluorescence instrumentation: KOALA
automated sample compartment, high pressure cell, TIRF cell for thin film
studies, photomultiplier tube housings, cooled photomultiplier tube housings,
and fiber optic cables. bifurcated fiber optics assembly for in-situ fluorescence
& reflectance measurements. variable-angle front surface sample holder
for turbid solutions and solid samples.
The newest innovation of ISS includes the development of a frequency-domain tissue spectrometer for the non-invasive measurement of oxygen concentration and metabolites in tissues. ISS has a long history of innovation and holds the relevant patents pertinent to frequency-domain instrumentation. ISS is a specialists in frequency-domain time-resolved fluorescence instrumentation. ISS instruments are installed in universities and corporations worldwide.
|IVS Ltd. (St. Petersburg, Russia) is a manufacturer of arc / spark optical emission spectrometers - OES metal analyzers. IVS manufactures stationary arc / spark optical emission spectrometers for metal analysis, alloy identification. The company also manufactures instruments parts and moduled for optical emission spectrometers. IVS offers custom manufacturing for optical emission spectrometers (arc / spark OES metal analyzers).|
|IXRF Systems, Inc.|
|IXRF Systems is a manufacturer of EDS microanalysis and imaging systems for electron microscopes, EDS detectors, EDS system upgrades, integrated X-ray fluorescence microanalysis systems for scanning electron microscopes (integrated XRF analysis in the SEM). IXRF Systems manufactires a complete EDS systems, EDX/EDS microanalysis systems, upgrades for existing EDS systems, EDS detector upgrades, such as light element windows, crystal changes. IXRF Systems manufactures X-ray fluorescence (XRF) microanalysis instruments for scanning electron microscopes: collimated X-ray source providing a 500 micron to 5mm X-ray spot analysis in the SEM, and micro-XRF analyzer system (X-ray spot sizes around 40-60 microns or larger). The key benefit is a reduced background - very low elemental analysis (ppm) can be performed. The X-ray fluorescence (XRF) microanalysis instruments uses SEM stages for creating elemental maps at the ppm level. The micro-EDXRF spectrometer system for scanning electron microscopes incorporates a polycapillary focusing optic to focus the x-ray beam, creating an excitation area of about 40 microns. The collimated X-ray source for SEM and micro-XRF spectrometer system can be adapted to just about any electron microscope and used with any EDS system.|
|Izmeritel (Russia) is a manufacturer of leak detection instrumentation for high vacuum systems: helium mass-spectrometer leak detectors and halogen leak detectors.|
|Companies not included in the current edition of catalogue.||Компании не включенные в текущую редакцию каталога.|
|Catalogue area -||Тематика каталога -|
|analytical equipment, laboratory equipment, FTIR, NIR spectrometers, Raman spectrometers, FTIR, NIR, Raman portable analyzers and process analyzers, FTIR microscope systems, Raman microscope systems, Raman imaging systems, fluorometers, fluorescence spectrometers, UV-visible, UV-vis-NIR spectrophotometers, refractometers, polarimeters, saccharimeters, lab, portable Brix meters, process in-line Brix monitors, atomic-absorption spectrometers, optical emission spectrometers for metal analysis, arc, sparc OES metal analyzers, alloy sorters, inductively coupled plasma atomic-emission spectrometers, ICP-AES (ICP-OES) systems, inductively coupled plasma mass-spectrometers, ICP-MS systems, NMR spectrometers, EPR spectrometers, X-ray fluorescence spectrometers, XRF spectrometers for metal analysis, lab, portable XRF metal analyzers, XRF sulfur in oil analyzers, mass-spectrometry instruments, TOF, quadrupole, magnetic sector mass-spectrometers, MS-MS systems, GC/MS instruments, GC-MS-MS systems, LC/MS systems, LC-MS-MS systems, GC instruments, lab, portable gas chromatographs, online, process GC systems, HPLC instruments, capillary LC systems, preparative LC systems, TLC equipment, ion chromatography instruments, ion chromatographs, ion analyzers, electrophoresis instruments, capillary electrophoresis systems, electrochemical analyzers, portable, process electrochemical instruments, flow injection analyzers, FIA systems, segmented flow analyzers, food analysis instruments, food testing equipment, NIR, FT-IR food and grain analyzers, food microbiology equipment, water analysis instruments, portable water testers, online water quality monitors, TOC analyzers, pharmaceutical analysis instruments, dissolution testing systems, tablet testers, FTIR, NIR tablet analyzers, petroleum testing instruments, flash point testers, NIR, FTIR gasoline analyzers, diesel fuel analyzers, C, H, N, O, S analyzers, GC, MS, FTIR gas analyzers, emissions analyzers, CEMS, thermal analysis instruments, TGA, DTA, STA systems, calorimeters, DSC systems, dilatometers, high temperature dilatometers, rheometers, viscometers, plastometers, melt flow indexers, materials testing equipment, material testing machines, environmental, climatic test chambers, particle size, particle shape analyzers, pore volume, surface area analyzers, tensiometers, X-ray diffraction instruments, XRD systems, scanning electron microscopes, SEM systems, transmission electron microscopes, TEM systems, scanning probe microscopes, atomic force microscopes, lab equipment for microbiology, biotechnology, pharmacology, biological safety cabinets, microbial analyzers, сolony counters, flow cytometers, osmometers...|
|Author of the catalogue - Andrey Yurievich Zhdanov.||Автор каталога - Андрей Юрьевич Жданов.|