|Manufacturers and suppliers of process (in-line, on-line) analytical equipment, process analytical instruments, composition analyzers, moisture analyzers (process GC instruments, on-line GC systems for gas analysis, NGA, RGA, process mass-spectrometers, on-line MS systems for gas analysis, online photometric analyzers, process FT-IR, NIR spectrometers, Raman spectrometers, refractometers, fluorometers, drinking water quality monitors, wastewater analyzers, continuous emission monitoring systems, CEMS).||Производители и поставщики промышленного аналитического оборудования, поточных, промышленных аналитических приборов (промышленные газовые хроматографы, масс-спектрометры для анализа газов, газоанализаторы, фотометрические анализаторы, ИК-Фурье, БИК, Рамановские спектрометры, рефрактометры, флуориметры, анализаторы питьевой воды, промышленных стоков, анализаторы промышленных газовых выбросов, дымовых газов).|
|Manufacturers and suppliers of continuous emission monitoring systems, CEMS (gas emissions measuring systems, stack emission analyzers).||Производители и поставщики анализаторов дымовых газов для непрерывного контроля газообразных промышленных выбросов.|
|International companies index.||Международный указатель компаний.|
|ABB process control instrumentation, process analytics.|
|ABB (ABB Instrumentation and Analytical)
is the process control instrumentation, process analytics manufacturer
and instrumentation solutions supplier. Instrumentation includes actuators
and positioners (a complete family of valve automation products), flowmeters
(gas flow meters, steam, liquid, slurry flow meters), temperature transmitters
and sensors, pressure transmitters and remote seals, remote sensing measurement
devices, industrial process signal monitoring and logging devices, process
recorders and controllers, process gas analyzers (continuous gas analysis
and emission monitoring instruments, CEMS, hydrogen purity analyzers, purge
gas analysers, combustibles analyzers, zirconia oxygen analyzer), at-line
gas chromatographs, laboratory gas chromatographs, process gas chromatographs
(GC system for simulated distillation, sulfur in fuel GC analyzer), gas
chromatograph sample handling systems, multiwave process photometers (fiber
optic photometer, IR, UV photometers), laboratory and process FTIR-NIR
spectrometers (FT-IR / Near-IR composition and moisture measurement analyzers,
on-line gasoline analyzer), physical property measurement analyzers (on-line
Reid vapor pressure analyzers), hydrogen sulfide analyzer for the measurement
of hydrogen sulfide in gas streams, water quality analyzers.
ABB Instrumentation and Analytical manufactures and supplies a broad range of process analytical instruments and complete analyzer systems for quality control of water: ammonia monitors, chloride monitors, dissolved organics, dissolved oxygen monitors, pH, conductivity, ORP monitors, fluoride analyzers, hydrazine monitors, nitrate monitors, phosphate monitors, silica monitors, sodium monitors, turbidity systems, water hardness monitors.
Packaged Analyzer Systems (pre-assembled water analysis and monitoring systems)- complete instrumentation for water analysis. These systems can be used to measure everything from pH and conductivity through to silica and phosphate. Supplied fully pre-manufactured and pre-tested, the water analysis system assemblies are delivered to site ready for operation. Only connection to samples, drains, power supply and signal outputs is necessary on site.
Process analytical instruments and systems for the continuous gas analysis and emissions monitoring (gas analyzers for the continuous measurement of process gases): Cement kiln gas analysis system with special gas sampling system for an effective monitoring of the combustion process in a cement plant. Continuous emission monitoring systems (CEMS) for the measurement of hazardous emissions, based on NDIR and FTIR analyzer technology. Continuous gas analyzer system for simultaneous determination of up to 12 measuring components like HCl, CO, NO, SO2, NO2, N2O, NH3, H2O, CO2, HF, O2 and C total.
|Altech Environment U.S.A.|
|Altech Environment is a supplies of gas analysis instrumentation, air pollution monitoring, emission monitoring, combustion control instrumentation (continuous emission monitoring systems, CEMS, multi-component infrared gas analyzer, chemiluminescent gas analyzers, gas sampling systems, particulate analyzer). Altech Environment is a part of Environnement S.A.|
|AMETEK Process Instruments.|
|AMETEK Process Instruments is a manufacturer of process analytical instrumentation - UV, visible, infrared, NIR photometric process analyzers, flue gas analyzers, continuous emission analyzer systems (continuous emission monitors, CEM systems), process mass spectrometers (online mass-spectrometer systems), mass spectrometers - residual gas analyzers (RGA systems), trace moisture analyzers, process oxygen analyzers, trace oxygen analyzers (zirconium oxide based oxygen analyzers for combustion control, air / fuel mixing control, furnace atmosphere control, trace oxygen measurement for pure gases).|
|Analytical Specialties, Inc.|
|Analytical Specialties Incorporated is a manufacturer of process analytical instrumentation, on-line (in-line) laser gas analyzer systems and sampler systems.|
|Baseline-MOCON, Inc. is a manufacturer of gas analysis
instrumentation - process analyzer systems, GC gas purity monitoring systems,
air quality testing instuments, toxic gas detection insruments, emissions
monitors. Baseline-MOCON is a manufacturer of automated continuous analyzers
(VOC analyzers, total hydrocarbon analyzers for environmental analysis,
industrial hygiene, process gas analysis, emission monitoring), automated
gas chromatographs (process on-line GC systems)- gas purity monitors for
the carbonated beverage industry (organic impurities in CO2 monitor, total
sulfur in CO2 analyzer), portable PID organic vapor detectors (photoionization
toxic gas sensors). Baseline-MOCON manufactures continuous total volatile
organic vapor analyzer (PID VOC detector), catalytic and GC methane/non-methane
hydrocarbon analyzers, FID total hydrocarbon analyzer. Automatic on-line
gas chromatograph can be configured for monitoring methane hydrocarbons,
non-methane hydrocarbons, benzene, toluene, ethylbenzene, xylenes (BTEX),
trace gas analysis.
Baseline-MOCON manufactures automated gas analyzer systems for trace detection of impurities in specialty gases, monitoring trace organics in specialty gases (monitoring acetaldehyde, BTEX impurities in CO2 for the carbonated beverage industry). Baseline-MOCON manufactures mud logging gas detection systems (mudlogging gas analysers)- FID total hydrocarbon analyzers for monitoring hydrocarbons in drilling fluids and automatic on-line GC system for fast analysis of C1 - C5 hydrocarbons. Baseline-MOCON also offers a variety of complimentary equipment for gas analysis: multipoint samplers, sample conditioners, calibration systems, hydrogen generators, air generators, and data acquisition systems.
|California Analytical Instruments Inc.|
|California Analytical Instruments (CAI) is a manufacturer of gas analysis instrumentation (gas analyzers) for the measurement of CO, CO2, NO, NOx, O2, SO2, CH4 (methane), THC (total hydrocarbons), TNMOC (total non-methane organic carbon) in air, automotive emissions measurement, heavy duty diesel systems exhaust measurement, evaporative emissions measutement, boilers optimization. California Analytical Instruments manufactures infrared gas analyzers, chemiluminescence gas analyzers, UV fluorescence gas analyzers, oxygen analyzers, flame ionization hydrocarbons-in-air analyzers, FTIR spectrometers for gas analysis (FTIR spectrometer analyzer systems), photoacoustic IR gas analyzers, integrated gas analysis systems, automotive engine emissions analyzers, heavy duty diesel engines exhaust measurement systems, CEMS. California Analytical Instruments manufactures a complete line of ambient monitoring and sensing equipment. The products range from FTIR and NDIR to automatic stream selectors to allow complete analysis of indoor air quality, and hazardous compound measurement. A complete product line of gas phase analyzers including photo acoustic IR and FTIR for the measurement of over 500 gases from PPb to percent levels. California Analytical Instruments also supplies peripheral equipment for gas analyzers, gas measurement systems: multipoint samplers, heated sample diluter, dilute constant volume sampling systems, gas divider, gas sampling pump, zero air generator.|
|CFTI Analytic (ЦФТИ "Аналитик").|
|CFTI Analytic (St.-Petersburg, Russia) is a manufacturer of process gas analyzer systems based on time-of-flight mass-spectrometer (TOF MS systems for on-line gas analysis), mobile TOF MS systems for gas analysis, flue gas analyzers, portable gas analyzers. The company manufactures TOF MS gas analyzer systems, quadrupole mass-spectrometers for residual gas analysis (residual gas analyzers, quadrupole RGA systems), magnetic sector mass-spectrometers for gas analysis. The company manufactures TOF MS gas analyzers for metallurgical furnace control, flue gas analyzers, continuous emissions monitoring systems (CEMS), gas sampling equipment. CFTI Analytic manufactures transportable, mobile TOF MS gas analyzer (mobile time-of-flight mass-spectrometer for gas analysis). The company manufactures portable, handheld gas analyzers. The company also manufactures vacuum components, high vacuum valves.|
|EcoMon (Moscow, Russia) is a manufacturer of flue gas analyzers.|
|Emerson Process Management.|
|Emerson Process Management is a supplier of products, services, and solutions that measure, analyze, control, automate, and improve process-related operations. Emerson Process Management (formerly Fisher-Rosemount) specializes in process-automation products and technology as well as measurement, analytical, and control instrumentation. Emerson Process Management offers engineering, consulting, maintenance, and project management services.|
|Environnement SA is a manufacturer of conventional and
open-path air quality monitors, instrumentation for measurement of gas
and dust emissions, on-line water quality analyzers for surface waters,
drinking water, industrial water and waste water analysis.
Air analyzers: UV Fluorescent SO2 Analyzer, Chemiluminescent Dual Channel NO - NOx - NO2 Analyzer, CO analyzer, Ozone analyzer, Hydrocarbons analyzer, BTX analyzer (Gas chromatograph with Photo Ionisation Detector, optional Flame Ionistaion Detector), Dust analyzer, Calibrators, Data acquisition and Software. A multi-gas, long path, air quality monitoring system- SANOA, based on UV Differential Optical Absorption Spectrometry (DOAS) for simultaneous measurements of a number of important pollutants including criteria pollutants and Volatile Organic such as BTX and Formaldehyde.
Stack emission analyzers: MIR 9000 Multi-Component Infrared Analyzer (HCl / NH3 / SO2 / CO / CO2 / N2O / HC / CH4) and Single Gas analyzers with and without dilution, Sec Probe and Dilution Probe gas sampling sysytems, BETA5M Dust analyzer and Stack Flow Rate and Temperature measurement.
Water analyzers: Specific Ions Analyzers by Selective Electrode (NH4+, NO3-, CN-, F-, Ag+, Ca2+, Na+, etc.), Total Organic Carbon Analyzer by Selective Electrode, Polarographic heavy metals analyzer, Infrared Spectrophotometric Hydrocarbon Analyzer, AUTO-MICROTOX Automatic Bioluminescent Bacteria Analyzer for Acute Toxicity, Multi parameters (T°, pH, dissolved O2, conductivity) analyzer and Permanent sampler.
|Galvanic Applied Sciences Inc.|
|Galvanic Applied Sciences (formerly Galvanic Analytical
Systems) is the process analytical instrument company. Galvanic Applied
Sciences manufactures process analytical and contol instrumentation for
the natural gas industry (process on-line gas chromatograph for natural
gas BTU measurement, natural gas flow and pressure measurement system,
H2S and total sulfur in natural gas analyzer), chemical and petrochemical
industries (gas chromatographs - sulphur analysers for lab and process
sulphur measurement, H2S and total sulphur in liquids analyzer, on-line
amine analyzer), emissions monitoring (continuous emission monitoring systems,
CEMS), water treatment process (water quality monitors). Galvanic Applied
Sciences is a manufacturer of equipment, instruments, systems for composition
measurement for gases and liquids, continuous natural gas analysis, sulphuric
gases analysis, determination of hydrogen sulphide and total sulphur levels
in process gas streams and liquids, measurement of the both rich and lean
amines content in process gases.
Galvanic Applied Sciences manufactures at-line, in-line, on-line gas chromatographs (GC systems with sulfur chemiluminescence detector), GC natural gas analyser, infrared gas analyzer (CO2, CH4, and CO analyzer), volume correctors and pressure recorders for the natural and process gas streams, in-line viscometers, in-line optical and acoustic transmitters for process liquids. Galvanic Applied Sciences manufactures the lead acetate series of total sulphur analyzers for low-level sulphur measurement in pipeline and process gases, the acid gas analyzer system for continuous and accurate determination of the hyrogen sulphide concentration in the sulfur plant inlet acid gas stream, and the sulfur plant tail gas analyzer system.
Galvanic Applied Sciences manufactures equipment, instruments, systems for continuous viscosity measurement of liquids (the Nametre in-line viscometers, viscosity sensors and transmitters), continuous turbidity, suspended solids and color measurments of liquids (the Monitek in-line turbidity, suspended solids and color monitors and sensors). Galvanic Applied Sciences manufactures the Tytronic dual wavelength UV-Color analyzer provides accurate measurements of dissolved organics and colored species in drinking water, process water, surface water, wastewater).
|J.U.M. Engineering GmbH.|
|J.U.M. Engineering GmbH is a manufacturer
of high temperature FID analyzers (heated FID) includes: total hydrocarbon
analyzers, non-methane hydrocarbon analyzers, stack emissions analyzers
based on the FID principle, sample handling and gas conditioning instruments,
aerosol can leak detectors, process oil in water monitors for detection
of diesel oil, jet fuel and oil in water. J.U.M. Engineering GmbH manufactures
a whole range of analyzers including wall mount analyzers, portable "All
In One" analyzer, FID analyzer is especially designed for the measurement
of total hydrocarbons in live hot and wet steam; comes fully equipped to
be connected to the steam source via a heated line and 19" rack mount analyzer;
ideal for low trace hydrocarbon applications and CEM systems with pressurized
sample or existing sample handling.
High Temperature Non-Methane Hydrocarbon FID Analyzer and High Temperature Non-Methane / Non Ethane FID Analyzer. J.U.M. custom fits total hydrocarbon analyzers for nearly every THC application in the industry by using standardized modules from a broad range of more than 15 different basic HFID analyzers. The New Heated Total Hydrocarbon Analyzer with Methane-Only Option- The J.U.M. Engineering Model VE 7-09A Total Hydrocarbon analyzer is a compact, rugged 19" rack mount analysis system using the FID (Flame Ionization Detector) principle.
Oil in Water Monitor FP 605 Series- Model FP 605 reliably detects diesel oil, jet fuel and oil in water. The FP 605 is a continuous, on-line, process or field control monitor which provides oil monitoring in water down to the low ppm range. The FP 605 is used for applications which require oil monitoring in treated and untreated wastewater streams. This could be from industrial wastewater, groundwater, process water, produced water and storm water run-off.
The Model FP 605 is available either with or withouit sample pump as a Stationary Wall Mount unit or as a Stationary 19" Rack Mount unit or as a Portable Field Analyzer.
Also J.U.M. Engineering manufactures: Heated sample handling systems, Flexible heated sample lines, Heated multi-point sample sequencers, Non-Methane Hydrocarbon Cutter module, Zero Air Generator, Portable Heated PreFilter and Rack Mounted Heated PreFilter, Burner Air Supply and Heated Sample Diluter for use with HFID analyzers in applications with hc-concentrations greater than some 10.000 ppm.
|K2BW Environmental Equipment Co.|
|K2BW Environmental Equipment Company is a manufacturer
of emission monitoring products, include continuous emissions monitoring
systems (CEMS), gas sampling equipment and gas analyzers for critical industrial
applications. K2BW Environmental Equipment Co manufactures continuous emission
monitoring systems, atmospheric corrosion test stations, specialty gas
monitoring systems, microprocessor-based heated total hydrocarbon analyzers,
heated NDUV sulfur dioxide analyzer, heated NOx analyzer, gas analyzers
for CO, CO2, O2 with powerful microprocessor functions (RS-232 control,
automatic start, self-diagnostics), heat traced sample lines, gas sampling
probes, heated prefilters, CEMS controllers. Also custom-manufacturing
of continuous emissions monitoring systems, gas sampling system components
(sample probes, controllers), atmospheric corrosion test systems (ASTM
Mixed Flowing Gas Method). K2BW Environmental Equipment Company is the
U.S. distributor for Signal Instruments (UK), manufacturer of advanced
technology gas analyzers.
K2BW CEMS capabilities include: Single and multipoint gas emissions monitoring systems for NO, NO2, NOX, SO2, O2, CO, CO2, THC, HCl. Mobile emissions monitoring trailers and transportable enclosure CEMS. Heated total hydrocarbon emissions monitoring systems per Method 25A. Industrial source and research facilities emissions testing equipment. Custom data aquisition (DAS), control and reporting. Guaranteed performance certification and compliance with USEPA and state agency requirements.
Gas Analyzers: K2BW Environmental Equipment Company is a stocking distributor for Signal Instruments, UK manufacturers of microprocessor-based gas analyzers, gas dividers, sample handling and support equipment. Signal Instruments offers a complete product line of compact microprocessor-based gas analyzers. Measured gases include carbon monoxide, carbon dioxide, sulfur diovide, oxides of nitrogen, oxygen and hydrocarbon gases.
Services: K2BW Environmental Equipment Company offer complete source monitoring expertise including CEMS applications engineering, upgrades and installation. Single-source supplier of gas analyzer parts and service support. Complete in-house gas analyzer repair and calibration lab. Customized CEMS maintenance support agreements and customer training. Specialized in 24-Hour CEMS emergency service & on-site field service. Other services: Rental Gas Analyzers supplied to your site with the right accessories. Used Emissions Monitoring Equipment bought or sold on consignment. Specialty gas analyzer systems for research, product testing. Temporary emissions and gas monitoring projects.
|Mercury Instruments GmbH.|
|Mercury Instruments GmbH is the analytical instrument company, manufacturer of laboratory mercury analyzers, process mercury analysers, continious emission monitors for measurement of mercury in air and other gases, mercury cellroom monitoring systems. Mercury Instruments GmbH also manufactures calibration gas generator for mercury analysis. The instruments are designed both for the laboratory and harsh industrial environments, provided measurement of mercury in air and other gases, "cold vapor atomic absoption spectroscopy" (CVAAS) mercury determination in soil, geological samples, waste samples, food and medical samples, on-line determination of mercury in liquids, monitoring of cellroom and cellroom ventilation air, continious emmission monitoring for mercury in stack gases.|
|P S Analytical Ltd.|
|P S Analytical Ltd is a manufacturer and supplier of analytical
instuments (elemental analysers), for the analysis of mercury, arsenic,
selenium, antimony, tellurium and bismuth at ultra trace levels. P S Analytical
specializes in the design and manufacture of instruments for elemental
analysis, from individual analysers to automated systems tailored to customer
requirements. Manufactures and supplies complete automated systems for
the ultra-trace determination of Hg, As, Se, Sb, Te and Bi. These analytical
instruments are mainly based on atomic fluorescence spectrometry. Featured
The Millennium systems have the ability to detect in widely varying sample concentrations, from a single part per trillion to more than ten parts per million, without the need for instrument adjustment and carryover from one sample to another. Can be coupled to capillary GC and HPLC for the speciation of mercury and hydride forming elements respectively. Continuous On-Line Mercury Analysers. The on-line mercury analyser provided continuous mercury analysis of either liquid or gaseous sample streams from ppt to ppm levels.
|Shimadzu Corporation is one of the world leading analytical and scientific instrument companies, a manufacturer of analytical equipment (gas chromatography, liquid chromatography instruments and systems, portable ion chromatography systems, mass spectrometry, optical spectroscopy, X-Ray spectroscopy instruments and systems, elemental analyzers, thermal analyzers), laboratory equipment (electronic laboratory balances, analytical balances, moisture determination balances - balance moisture analyzers), measuring equipment (calorimeters, moisture meters, viscometers, rheometers, particle size analyzers, force gauges, specific gravity meters), scientific equipment (X-ray, XRF spectrometers, X-ray diffractometers, surface science instruments: scanning electron microscopes, scanning probe electron microscopes), materials testing equipment (material testing machines, hardness tester systems). Manufactures analytical instruments for environmental analysis: ambient air analyzers, toxic gas analyzers, water quality analyzers (oil in water analyzer).|
|Tekran Inc is the analytical instrument company, manufacturer
of laboratory, field portable and process mercury analyzers (continuous
monitoring of mercury), calibrators and accessories for mercury analysis.
Tekran Inc manufactures a full line of analytical instrumentation for the
measurement of ultra-trace amounts of mercury in ambient air, water, and
virtually any combustion source). Analytical equipment for mercury analysis:
The Series 2600 Automated Water Analysis System- modular, fully automated total mercury analytical system is Method 1631 compliant.
The Model 2500 Cold Vapor Atomic Fluorescence Spectrophotometry (CVAFS) Mercury Detector has an absolute detection limit of <0.1 pg of mercury.
The Model 2505 Saturated Mercury Vapor Calibration Unit allows calibration of any low level gas phase measurement system.
The Model 2537A Ambient Mercury Vapor Analyzer provides continuous ambient monitoring of total gaseous mercury (TGM) with a detection limit of < 0.1 ng/m3 (25 PPQ vol). The analyzer is suitable for laboratory, field or mobile use and is designed to integrate easily into existing monitoring networks.
The Tekran Model 1130 Mercury Speciation Unit provides the Model 2537A Mercury Vapor Analyzer with the ability to simultaneously monitor elemental and reactive gaseous mercury (RGM) in ambient air.
Speciating Mercury Continuous Emissions Monitor (CEM) - The Series 3300 can measure total, elemental and ionic mercury in virtually any combustion source. The system is sensitive enough to measure levels at any coal fired power plant and is immune to the interferences that plague conventional mercury CEM systems.
|Teledyne Advanced Pollution Instrumentation.|
|Teledyne Advanced Pollution Instrumentation (formerly Advanced Pollution Instrumentation, Inc - API) is a manufacturer and supplier of instruments for measuring pollutants in the atmosphere (ambient monitoring) and in the emissions of various industrial processes (source emissions monitoring). Enviromental analyzers for ozone, oxides of nitrogen, sulfur dioxide, carbon monoxide, air pollution monitors, stack monitoring and CEM analyzers. Product lines: Analyzers for ambient and stack levels of carbon monoxide. Analyzers for oxides of nitrogen and ammonia. Analyzers for ambient and industrial levels of ozone. Analyzers for Sulfur Dioxide, Hydrogen Sulfide, TRS. Calibrators and zero air sources.|
|Teledyne Analytical Instruments.|
|Teledyne Analytical Instruments offers scientific solutions for chemical analysis problems. Teledyne Analytical Instruments is the analytical instrument company, manufacturer of gas and liquid analytical instrumentation, electrochemical sensors, analyzers, and custom analytical systems for process control, air separation, medical life support systems, and automotive emissions test equipment. Teledyne Analytical Instruments manufactures electrochemical sensors, oxygen analyzers (trace, percent, portable, online oxygen analysers); flue gas and emission monitoring analyzers and systems, process photometric analyzers (UV, VIS, NIR, IR process photometric analysers), carbon monoxide and flammable gas analyzers, trace hydrogen and thermal conductivity gas analyzers, hydrocarbon analyzers, nitrogen oxide emissions monitoring, sensors and detectors. Series IR7000 Non-dispersive Infrared Gas Analyzers. Portable gas analyzers. Teledyne Analytical Instruments offers a wide selection of options and custom systems to support your special needs.|
|Author of the catalogue - Andrey Yurievich Zhdanov.||Автор каталога - Андрей Юрьевич Жданов.|
|Analytical and laboratory equipment companies, scientific instrument companies.||Производители и поставщики аналитического и лабораторного оборудования.|